2X Replicator Configuration for 3D Printing

Summary

Settings that need to be changed in 2X Replicator in order to correctly 3D print.

When printing with the MakerBot 2X replicators there are 4 custom settings that need to be adjusted for proper printing.

1. Printer | Travel Speed | Change to 140mm/s

2. Extruder | Extruder 1 Temperature | Change to 210 degrees Celsius

3. Base Layer | Base Layer | Change to Padded base + Brims

4. Base Layer | Brims Model Offset | Set to 0.1 mm

See pictures below for reference

Article ID: 10847

Created

Wed 12/28/22 9:13 PM

Modified

Fri 1/27/23 1:23 PM