Body
BEHRINGER SPEAKER
The Behringer Speaker is an all in one speaker/microphone system. It consists of the speaker, A/C cord, a usb wireless receiver, and a wireless microphone.
Power Switch – Located in the back lower left corner of the speaker.
Volume Control Knob - Located in the back top right corner of the speaker. Display window shows battery level and volume level.
Wireless USB Receiver – This usb must be plugged in the back of the speaker for the wireless microphone to work.
Wireless Microphone – Press and hold the top volume button (green arrow) to turn the microphone on. The green power button will light up. Press and hold the bottom volume button (red arrow) to put the microphone into standby mode. The green power button will blink. Press and hold the bottom volume button again to turn the microphone off.
Troubleshooting
No Power
Check that the power cord is plugged into both the wall outlet and the back of the speaker.
Check that the toggle switch for the power is on.
No Sound
Check the volume level on the back of the speaker.
Check that the USB receiver is firmly plugged into the back of the speaker.
Check that the microphone is on. There should be a steady green light if the microphone is on.
Press the volume up button on the microphone.
This Article has been Modified by: Matin Alamutu on 15MAR2023